Обновление программного обеспечения Spektrum DX8 до версии 1.04

Внимание владельцам аппаратуры новой Spektrum DX8! Новая версия ПО стала доступна для скачивания. Ознакомиться с деталями можно под катом.


Итак, версия 1.04 является первой, содержащей настройки для конкретных моделей и уже сейчас доступна для загрузки.

Появились настройки для моделей:

• Park Zone Corsair
• Park Zone Habu
• Avant Aurora-E
• Align T-Rex 700e FBL
• Align T-Rex 450 pro
• Align T-Rex 700e
• Align T-Rex 550e FBL

Обновления:

• Trim Center Pause – When adjusting the trims through center, the pause was lengthened to allow the center position to be more easily accessed.
• Knob Center Tone – When adjusting the knob, it generates a “center trim” tone as it rotates through center.
• LiPo Battery Verification – Attempting to change the battery type in the Extra Settings screen from NiMH to LiPo will not be allowed until a LiPo battery is installed. This prevents the user from mistakenly selecting the LiPo battery voltage cutoff with a NiMH battery installed.
• Frame Rate Defaults to 22ms – The Frame Rate now defaults to 22ms rather than 11ms. This prevents analog servo compatibility issues in the default mode.
• AirWare Auto-Update – To guard against inadvertently downgrading the radio’s AirWare, after installing version 1.04 or higher the system will rename the update file to prevent it from auto-loading in the future.
• Startup Screen – The startup is changed so that an inaccurate “No RF Link” warning is not displayed.

Исправления:

• Heli Mode Trainer Button – If the Trainer button was assigned to a channel in the Switch Select screen, the channel was inactive.
• Flap Trim – When a Flaperon wing type was selected and the right or left trimmer was assigned to flap trim, the trim was mixed as ailerons instead of flaps. It was also not possible to deactivate flap trim once selected.
• Acro Throttle Curve – Pressing the CLEAR button could allow the displayed throttle curve to not match the values entered numerically.
• German Timer – The prompts for the German-mode throttle-based timer controls were renamed so as to be more intuitive.
• Throttle = Gasstellung
• Throttle 1-time = Motorstart
• Throttle Out = Motorlaufzeit